Munition records

The M935 is a selectable-option fuze used with 60 and 81 mm high explosive fragmentation (HE-frag) bombs. The M935 pr...

The M936 is a selectable-option fuze used with 60 mm bursting white phosphorus (WP) bombs, its arming both mechanically-...

The M734 is a US-developed, multi-option mortar fuze, which combines proximity (air-burst), impact and delayed impact fu...

The M783 is a US electronic mortar fuze, which combines superquick (SQ) and delayed impact functionality. The M783 is...

The M767 is a US-developed, electronic time (ET) artillery projectile fuze, which features a crush-switch-based point-de...

The M767A1 is a US-developed, electronic time (ET) artillery projectile fuze, which features a crush-switch-based point-...

The M52 were a series of US point-detonating superquick (PDSQ) fuzes, which were used with 60 and 81 mm high explosive,...

The M53 are a series US point-initiating delay nose fuzes, which were used with M56 series of 81 mm high-capacity high e...

The M739A1 is a US-developed point detonating (PD) and delay fuze, which is used with spin-stabilised explosive (HE) and...

The M724 is a US-developed, electronic time (ET) artillery projectile fuze, which does not features a point-detonate (PD...

All-ways acting For use with incendiary bombs.

This is a base detonating, projectile fuze used in 105mm gun HEP-T and WP-T cartridges.

This is a base detonating, projectile fuze used in 105mm howitzer HEAT-T cartridges, and 106mm gun HEP cartridges. S...

This is a nose, impact initiated, bomb fuze.

This is a tail, impact-inertia fuze.

This is a mechanical time and superquick projectile fuze, used in 90mm through 280mm projectiles.

This is a mechanical time projectile fuze, used in 4.2in (107mm) mortar illuminating cartridges.

This is a mechanical time projectile fuze, and was designed especially for use with the 105mm flechette-loaded M494 cart...

This is a point initiating, base detonating (PIBD) fuze.

The M84 is a later WWII-era powder train time (PTT) fuze. The M84 is (has been) fitted to the M301, M301A1 and M301A2...

The M603 is a US-developed, instantaneous-action, pressure-actuated mine fuze, which is used with the US M6A2, M15, M7A2...

The M607 is a pressure-actuated tilt-rod fuze used with the M21 AT mine. The fuze incorporates a Belleville spring-loade...

The M624 fuze is a pressure-actuated tilt-rod fuze used with the US M15 AT mine. The fuze consists of the M607 fuze asse...

The M1A1 is a pressure-operated body trap device used in initiate mines and demolition charges. The M1A1 will accept...

The M1 Pull Fuze is an obsolete firing device intended for initiation using a tripwire. Though M1 Pull Fuze is obsol...

The M6 are a series of combination-type fuze that is used to initiate the US M2 Series of anti-personnel bounding fragme...

The M7 are a series of combination-type fuze that is used to initiate the US M3 series of anti-personnel fragmentation (...

The M433 is an electronic multi-option time delay fuze for use with helicopter-fired 2.75 inch (≈70 mm) air-to-ground ro...

The M500A1 is a mechanical time and super quick (MTSQ) artillery fuze with a detonative output. The M500A1 is normall...

The M84A1 is a powder train time (PTT) fuze used with the M301A3 81 mm mortar illuminating bomb. The M84A1 is a very...