Munition records

Mexican-(assumed Cartel-)manufactured improvised air-delivered munitions (IADM) for uncrewed aerial vehicle (UAV, a.k.a....

The Sejil (Arabic: سجيل) is an improvised explosive device (IED) produced and used by the Izz al-Din al-Qassam Brigades...

The explosive 'Elbow' (Arabic: كوع) is a Palestinian, likely developed by (or with assistance of) Hamas, pipe bomb style...

The Commando Action Package is a Hamas (Izz ad-Din al-Qassam Brigades) improvised explosive device (IED). It utilises th...

This is an undesignated directional-fragmentation, improvised explosive device (IED) manufactured locally in Syria. The...

Dimensions are estimates

Irregular shapes, made to resemble rocks. Often use det cord initiation

Steel pipe with MS plate at one end. Dimensions are estimates

Steel pipe, welded ends with bolt-on access plate. Re-bar handles at each end. Dimensions are estimates

Steel pipe, welded flanges with square bolt-on access plate. Re-bar handles welded to pipe near each end. Detonating cor...

Large gas bottle casing; some with access panel cut into base. Electrical or det cord initiation. Dimensions vary

Steel pipe with welded ends. Electrical initiation. Dimensions are estimates

Made from gas bottle cut in half, with tabs welded to retain the front sheet steel plate. Initiated by det cord. Dimen...

Steel box with HME in lower section and large ball bearings of mixed sizes (est 10-15 mm diameter) above. Steel tabs we...

Percussion fuze incorporating a substantial booster. Dimensions are estimates

This is an undesignated, remote-controlled IED device. The power source, electronics and explosive charge are house with...

The tilt switch is a type of anti-handling switch and is designed to initiate the device if the switch is moved. Common...

The most common type of IED switch found in conflict zones. Are often constructed of two separate strips of conductive m...

One of the most common types of victim operated switches used in Iraq and Syria. This switch is mass-produced on reels...

Pressure release switches have been seen as victim operated switches mainly for IEDs emplaced in buildings and targeting...

The low metal content pneumatic switch acts in a similar way to a pressure plate in that when pressure is applied the de...

Light sensitive switches use a Light Dependent Resistor (LDR) to close a circuit and function a device. They can be u...

Normally incorporates two metal contacts one of which is in a fixed position which come together when a length of string...

Hope RF is an RC Receiver/Transmitter Pair which has the following functions: Has a safe-to-arm timer, requires an arme...

Dual Tone Multi Frequency (DTMF) Boards have the following functions: Receive command codes from cell phone or Push-to-...

Custom Switching Circuit has the following functions: Has a safe to arm timer, arms when the phone rings for 3 seconds,...

ISIS and other Iraq based insurgents have used RC armed PIR as a VO Switch. Commonly insurgents use this switch type f...

The Remote Fob Trigger is a RC switch. It is a commonly seen RC switch due to it’s prominence in AFGHANISTAN and to a l...

Long Range Cordless Telephone or High Powered Cordless Phones have a range of up to 800m. They can be used with either...

Modified alarm clocks and other timers can be used as safe to arm timers or as firing switches. Types include washer ma...