Home / Munition records
Munition records
Explore our comprehensive, continually expanding database of munitions, platforms, and CBRN agents. Access high-quality imagery, technical details, specifications, and event data for each record.
Filter results
Clear allApplied filters
Category
Bomb 11 Booby Trap 1 Cannon Ammunition 2 Demolition Stores 1 Dispenser 0Manufacturing country
Afghanistan 5 Albania 4 Algeria 1 Angola 2 Anguilla 1Found in country
Afghanistan 13 Albania 3 Algeria 1 Angola 7 Argentina 2Diameter/Calibre/Width
Measurement in millimetres (mm)
Mass (kg)
Measurement in kilograms (kg)
Maximum length
Enter values rounded to the nearest 10 mm (e.g. 110, 1230, 1840)
Showing 31-57 of 57 results
7.62×39
SAA
The 7.62×39 is a Soviet-era-developed, Russian Federation, intermediate-power military-developed cartridge, likely the m...
GLM-2
Booby Trap
The GLM-2 is an electronic anti-disturbance device designed for use with the Pakistan P2 and P3 series AT mines. The dev...
120 mm Mortar Ammunition
Mortar Bomb
Many countries produce 120 mm mortar ammunition of domestic, licensed-copy, or cloned design. Russian Federation, or for...
M107 (155 mm HE)
Projectile
The M107 is a spin-stabilised, nose-fuzed, 155 mm high-explosive (HE) fragmentation (FRAG) artillery projectile (shell),...
L35
Projectile
HESH round with base fuze and tracer. Casing is thin at the nose and ogive, with tip filled with wax. Using weapon(s...
Baktar Shikan
Missile
Copy of Red Arrow 8 with 120 mm unitary or tandem HEAT warheads. Guidance: Wire
P7
Mine
The P7 is a Pakistani anti-personnel bounding fragmentation (APBF) mine, which is based on their P3 model. Both the P...
7.62×25
SAA
The 7.62×25 Tokarev cartridge (round), which has numerous other names, would be developed between 1929 and 1930 for new...
P3
Mine
The P3 is a Pakistani anti-personnel bounding fragmentation (APBF) mine. The P3 is based on the US M2 mine series, bu...
Ra'ad
Missile
Turbojet propulsion. Land-attack cruise missile.
M1 (105 mm HE)
Projectile
The M1 is a US 105 mm high explosive fragmentation (HE-frag) projectile that forms part of many semi-fixed artillery rou...
MK 81 (GIDS)
Bomb
It has a 320 mm tailspan with the standard conical fin unit. Its lug spacing can be 356 mm (NATO) or 250 mm (Russian)...
MK 82 (GIDS)
Bomb
It has a 383 mm tailspan with the standard conical fin unit. Its lug spacing can be 356 mm (NATO) or 250 mm (Russian)...
MK 83 (GIDS)
Bomb
It has a 498 mm tailspan with the standard conical fin unit. Its lug spacing can be 356 mm (NATO) or 250 mm (Russian)...
MK 84 (GIDS)
Bomb
It has a 643 mm tailspan with the standard conical fin unit. Its lug spacing can be 762 mm (NATO) or 650 mm (Russia)....
MAU-938 tail unit
Bomb
356 mm lug spacing. General purpose bomb.
Mk 15 Mod 4 retarding tail
Bomb
356 mm lug spacing. General purpose bomb.
M57D Mk 1
Mortar Bomb
The M57D Mk 1, which may be referred to by various other names (see 'Alternate designations' area), is a Pakistani, 81 m...
V19PA
Fuze
This is a point-detonating (PD) mortar fuze. The fuze has delay (R) and instantaneous (I) settings. Pakistani versos...
106 mm Improved HEAT
Projectile
Features hardened projectile top to punch through Explosive Reactive Armour (ERA) without initiating it prior to the mai...
35x228 Ammunition
Cannon
The 35×228 ammunition family was developed in Switzerland by Oerlikon in the 1950s for their '352 MK' (MK = Maschinenkan...
AP HE P2 A1
Grenade
The Pakistani AP HE P2 A1 is a clone of the Austrian Spl HGr 84 (Splitter Handgrenate 84). For further information pleas...
P3 MARK 1 WP SMOKE GRENADE
Grenade
Pakistani 100-mm HEAT Munition
Projectile
Bangalore Torpedo
Demolition Stores
PDM 557/552
Fuze
51/52 mm Mortar Ammunition
Mortar Bomb
Filter results
Clear allApplied filters
Category
Bomb 11 Booby Trap 1 Cannon Ammunition 2 Demolition Stores 1 Dispenser 0Manufacturing country
Afghanistan 5 Albania 4 Algeria 1 Angola 2 Anguilla 1Found in country
Afghanistan 13 Albania 3 Algeria 1 Angola 7 Argentina 2Diameter/Calibre/Width
Measurement in millimetres (mm)
Mass (kg)
Measurement in kilograms (kg)
Maximum length
Enter values rounded to the nearest 10 mm (e.g. 110, 1230, 1840)